CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] safe temp for steppers ?

Posted by Tim Goldstein
on 2003-08-19 07:40:00 UTC
> -----Original Message-----
> Hi all,
> What would be considered a safe temperature for continous
> operation of stepper motors ?
>
> I'm running 300Ncm motors with2,8A per phase current using
> G201 geckodrives and the motors reach +40-45 C in half an
> hour or so....
>
> thanks for any ansers,
>
> AW
> FAQ: http://www.ktmarketing.com/faq.html

It would depend upon the thermal rating for the motors. All the ones
that I have seen marked with a max temperature or with an acceptable
temperature rise had values that were much higher than most of us feel
comfortable running a motor. The unit that I have next to me is marked
for 90°C.

Tim
[Denver, CO]
Order now to beat the Sherline price increase October 1
Sherline & Taig products at Deep Discount
Mach1 & DeskCNC with credit card ordering
www.KTMarketing.com/Sherline
e-mail me at Timg @ KTMarketing.com for items not yet listed

Discussion Thread

awallin25 2003-08-19 04:59:51 UTC safe temp for steppers ? Les Newell 2003-08-19 05:10:13 UTC Re: [CAD_CAM_EDM_DRO] safe temp for steppers ? Tim Goldstein 2003-08-19 07:40:00 UTC RE: [CAD_CAM_EDM_DRO] safe temp for steppers ? David A. Frantz 2003-08-19 09:14:53 UTC Re: [CAD_CAM_EDM_DRO] safe temp for steppers ? Tim Goldstein 2003-08-19 09:36:28 UTC RE: [CAD_CAM_EDM_DRO] safe temp for steppers ? Raymond Heckert 2003-08-19 17:33:45 UTC Re: [CAD_CAM_EDM_DRO] safe temp for steppers ?