Re: Sherline CNC Mill/Lathe Improvements
Posted by
dttworld21286
on 2003-08-26 20:13:06 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Carol & Jerry Jankura"
<jerry.jankura@s...> wrote:
around 5 years ago. With this mod I do get 12" of y-axis travel
without needing to reposition the stock.
spindle and motor horizontally onto the aluminum base plate. I then
use the existing x,y slides to mount the cutting tool. Being able to
reuse the parts from the mill for the lathe conversion saved a lot
of money.
Danh
<jerry.jankura@s...> wrote:
> I visited your site. Quite impressive modifications that you'vemade.
>instead of
> A couple questions?
>
> 1. Would it have made sense to start out with the model 2000 mill
> the one you started with? I would think that you would not havehad to do
> much alteration to get the throat that you wanted.I don't think the model 2000 was available when I bought my setup
>
around 5 years ago. With this mod I do get 12" of y-axis travel
without needing to reposition the stock.
> 2. From a practical standpoint, how much overhead to you find inconverting
> from the mill to the lathe, and back? Is this a valid concern, oris it like
> the Shopsmith - those who have the machine know that it's noproblem to
> convert; those who have never had one think it's a real problem.The lathe conversion is pretty simple. I just have to reposition the
spindle and motor horizontally onto the aluminum base plate. I then
use the existing x,y slides to mount the cutting tool. Being able to
reuse the parts from the mill for the lathe conversion saved a lot
of money.
Danh
>
> -- Jerry
>
>
> > Sorry folks. The link should be:
> >
> > http://www.imaginerobots.com
> >
> > The period got added to the end of the url link in the original
> > message.
Discussion Thread
dttworld21286
2003-08-25 23:26:03 UTC
Sherline CNC Mill/Lathe Improvements
dttworld21286
2003-08-26 07:45:44 UTC
Re: Sherline CNC Mill/Lathe Improvements
Carol & Jerry Jankura
2003-08-26 10:38:01 UTC
RE: [CAD_CAM_EDM_DRO] Re: Sherline CNC Mill/Lathe Improvements
dttworld21286
2003-08-26 20:13:06 UTC
Re: Sherline CNC Mill/Lathe Improvements