Re: Miniature Automatic Tool Changer
Posted by
roel_cnc
on 2003-09-07 21:59:51 UTC
i like that looks great.
but what happens with that 1 failure : 1000
any security build in!
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "onecooltoolfool"
<joevicar3@i...> wrote:
but what happens with that 1 failure : 1000
any security build in!
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "onecooltoolfool"
<joevicar3@i...> wrote:
> Mark, check out the movie under "sherline tool changer" folder inthe
> files section.tune.This
> It has been tested at 1 failure per about 800 to 1000 tool change
> cycles. It is very robust.
> Probably take you 80 to 120 hours to complete, install and
> is just a guess. It took about 6 months to develop.
> Joe V.
Discussion Thread
onecooltoolfool
2003-09-07 06:57:40 UTC
Miniature Automatic Tool Changer
turbulatordude
2003-09-07 07:26:10 UTC
Re: Miniature Automatic Tool Changer
mmurray701
2003-09-07 15:04:22 UTC
Re: Miniature Automatic Tool Changer
onecooltoolfool
2003-09-07 15:30:53 UTC
Re: Miniature Automatic Tool Changer
roel_cnc
2003-09-07 21:59:51 UTC
Re: Miniature Automatic Tool Changer
Randy Gordon-Gilmore
2003-09-14 00:14:57 UTC
Frequency to Analog board available
Randy Gordon-Gilmore
2003-09-14 12:37:31 UTC
Re: Frequency to Analog board available
Randy Gordon-Gilmore
2003-09-14 13:24:16 UTC
Drill roughing?
Randy Gordon-Gilmore
2003-09-14 13:28:21 UTC
Re: [CAD_CAM_EDM_DRO] Drill roughing?
Yesamazza@a...
2003-09-14 18:29:33 UTC
Re: [CAD_CAM_EDM_DRO] Drill roughing?
tomp_tag
2003-09-14 19:11:43 UTC
Re: [CAD_CAM_EDM_DRO] Drill roughing?
Tim Goldstein
2003-09-14 19:50:58 UTC
RE: [CAD_CAM_EDM_DRO] Drill roughing?
Raymond Heckert
2003-09-14 21:24:11 UTC
Re: [CAD_CAM_EDM_DRO] Drill roughing?
Randy Gordon-Gilmore
2003-09-18 00:16:03 UTC
Re: Drill roughing?
tomp_tag
2003-09-19 07:00:28 UTC
Re: [CAD_CAM_EDM_DRO] Re: Drill roughing?