Re: Single parameter G02 conversion

Not at all. Some CAM systems don't require the second or third or
fourth parameters. Mine does.

--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Charles Hixon"
<cehixon@y...> wrote:

> Your new DXF converter didn't live up to its claim. Charles Hixon
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "kdoney_63021"
> <kdoney_63021@y...> wrote:
> > I am using a new DXF converter which produces single parameter

G02

> > moves. My CAM system requires 2. How do I come up with the second
> > parameter? The following is a sample:
> >
> > Bearing4tool1
> > G00G90X0.75Y1.25
> > G00G90Z1.52
> > G01G90Z1.5F0.01
> > G01G91Z-0.01F0.01
> > G01G91Y0.2F0.01
> > G02J-0.2
> > G01G91Y0.2F0.01
> > G02J-0.4
> > G01G91Y0.154F0.01
> > G02J-0.554
> > G00G91Y-.010Z.010
> > G00G90X0.75Y1.25
> >
> > ...