Re: Single parameter G02 conversion
Posted by
Charles Hixon
on 2003-09-08 13:46:49 UTC
OK, assuming that's true, your I-value could be any number within a
range and the DXF converter may not state it because it is a default
value. A default value which comes to mind is the G91X0.0000
(G90X0.75), therefore the missing parameter is I0.0000 and you are
cutting semi-circle profiles. Some converter you got! Charles Hixon
range and the DXF converter may not state it because it is a default
value. A default value which comes to mind is the G91X0.0000
(G90X0.75), therefore the missing parameter is I0.0000 and you are
cutting semi-circle profiles. Some converter you got! Charles Hixon
> Not at all. Some CAM systems don't require the second or third orHixon
> fourth parameters. Mine does.
>
> > Your new DXF converter didn't live up to its claim. Charles
> >second
> > > I am using a new DXF converter which produces single parameter
> G02
> > > moves. My CAM system requires 2. How do I come up with the
> > > parameter? The following is a sample:
> > >
> > > Bearing4tool1
> > > G00G90X0.75Y1.25
> > > G00G90Z1.52
> > > G01G90Z1.5F0.01
> > > G01G91Z-0.01F0.01
> > > G01G91Y0.2F0.01
> > > G02J-0.2
> > > G01G91Y0.2F0.01
> > > G02J-0.4
> > > G01G91Y0.154F0.01
> > > G02J-0.554
> > > G00G91Y-.010Z.010
> > > G00G90X0.75Y1.25
> > >
> > > ...
Discussion Thread
kdoney_63021
2003-09-08 09:35:20 UTC
Single parameter G02 conversion
Charles Hixon
2003-09-08 11:03:40 UTC
Re: Single parameter G02 conversion
kdoney_63021
2003-09-08 11:14:24 UTC
Re: Single parameter G02 conversion
Charles Hixon
2003-09-08 13:46:49 UTC
Re: Single parameter G02 conversion
Torsten
2003-09-09 04:24:24 UTC
Re: Single parameter G02 conversion