CAD CAM EDM DRO - Yahoo Group Archive

parallelism

Posted by viewpanel1
on 2003-09-17 07:33:39 UTC
Hi guys:

Does somebody have a tip or jig to assure the linear guide rails are
parallel? In my case the rails are located on the outside face of the
bed frame along the rack.

Thanks Jose

Discussion Thread

viewpanel1 2003-09-17 07:33:39 UTC parallelism Jon Elson 2003-09-17 10:41:09 UTC Re: [CAD_CAM_EDM_DRO] parallelism