Re: [CAD_CAM_EDM_DRO] PC to driver interface types
Posted by
illya
on 2003-09-30 04:04:52 UTC
Hi
http://www.rutex.com/home/servo.htm to control the step and direction. Or
spend an extra $50 and get rt990h and you wont need a a-m-c driver.
http://www.artofcnc.ca/DownLoads.htm
Illya
> Hi, I have a question:Yes you can but you will need to use a R991H
> What are the different types of PC to driver interface? For example,
> how would these drivers: http://www.a-m-c.com/products/pwminput.htm
> interface with a PC?
> What are the different types of PC to driver interface? For example,
> how would these drivers: http://www.a-m-c.com/products/pwminput.htm
> interface with a PC? It says PWM input, how does this differ from
> other types of signals?
http://www.rutex.com/home/servo.htm to control the step and direction. Or
spend an extra $50 and get rt990h and you wont need a a-m-c driver.
>Can they be used with software like Turbocnc?You should download & try Mach2, excellent software at
http://www.artofcnc.ca/DownLoads.htm
Illya
----- Original Message -----
From: "builder4wd" <builder4wd@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Tuesday, September 30, 2003 4:32 PM
Subject: [CAD_CAM_EDM_DRO] PC to driver interface types
Discussion Thread
builder4wd
2003-09-30 00:02:53 UTC
PC to driver interface types
illya
2003-09-30 04:04:52 UTC
Re: [CAD_CAM_EDM_DRO] PC to driver interface types
Jon Elson
2003-09-30 10:22:48 UTC
Re: [CAD_CAM_EDM_DRO] PC to driver interface types
Peter R
2003-09-30 11:32:01 UTC
Re: [CAD_CAM_EDM_DRO] PC to driver interface types