CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] PC to driver interface types

Posted by Peter R
on 2003-09-30 11:32:01 UTC
Also check out http://www.jraco.com/ this system is a G-Code Controller
front end that in turn controls a Galil motion card plugged into the PC.
The Galil card can output +/- 10V analog, PWM or Step & Direction. I
have this system running on one of my machines with analog AMC amps but
I know it also works with PWM drives from AMC. I was thinking about
setting it up in Step & Direction mode and hooking it up to my Gecko or
Rutex drives to see how that works but haven't got around to it. BTW,
it works brilliantly. (yada yada just a happy customer)

Cheers, Peter

builder4wd wrote:

>Hi, I have a question:
>What are the different types of PC to driver interface? For example,
>how would these drivers: http://www.a-m-c.com/products/pwminput.htm
>interface with a PC? It says PWM input, how does this differ from
>other types of signals? Can they be used with software like Turbocnc?
>I'm a bit confused over the various PC-to-driver interfaces, and I'd
>really appreciate it if anyone could shed some light on this. Thanks
>in advance.
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
>Moderator: pentam@... indigo_red@... [Moderators]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>bill
>List Mom
>List Owner
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

Discussion Thread

builder4wd 2003-09-30 00:02:53 UTC PC to driver interface types illya 2003-09-30 04:04:52 UTC Re: [CAD_CAM_EDM_DRO] PC to driver interface types Jon Elson 2003-09-30 10:22:48 UTC Re: [CAD_CAM_EDM_DRO] PC to driver interface types Peter R 2003-09-30 11:32:01 UTC Re: [CAD_CAM_EDM_DRO] PC to driver interface types