Re: [CAD_CAM_EDM_DRO] Servo Motors.

You will find a very good explanation of systems at the
linuxcnc.org site under LINKS, Compumotor.

Steve

----------
From: james owens <wotisname@...>
To: CAD_CAM_EDM_DRO@onelist.com
Subject: [CAD_CAM_EDM_DRO] Servo Motors.
Date: Sunday, March 26, 2000 5:14 AM

From: "james owens" <wotisname@...>

Hi All,

Can anyone explain servo motors and their controls to me in enough depth so
that I can put together an axis.

Regards,

Terry.



[Non-text portions of this message have been removed]


------------------------------------------------------------------------
PERFORM CPR ON YOUR APR!
Get a NextCard Visa, in 30 seconds! Get rates as low as
0.0% Intro or 9.9% Fixed APR and no hidden fees.
Apply NOW!
http://click.egroups.com/1/2121/2/_/423600/_/954076410/
------------------------------------------------------------------------

Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems in the above catagories.
To Unsubscribe, read archives, change to or from digest.
Go to: http://www.onelist.com/isregistered.cgi
Log on, and you will go to Member Center, and you can make changes there.
For the FAQ, go to http://www.ktmarketing.com/faq.html
bill,
List Manager