Re: [CAD_CAM_EDM_DRO] Rutex

Hi Dan,

The Rutex drives are excellent products and very good support (but not
quite as good as Mariss). I would assume his torch controller would be
equally well engineered as his drives. I've used Vlad's products for
well over a year now and have been very happy. I particularly like the
tuning utility which uses a simple to make cable from your parallel
port. You plug it into the drive under test and it gives a step impulse
to the drive and then plots the step response on the PC's screen. You
can then adjust PID values to get the best step response etc. It's a
very useful tool. I had no trouble buying from Oz and the drives
arrived in less than a week.

Cheers, Peter

dan wrote:

>Has anyone here had any experience with the Rutex Products from
>Austrailia? I am interested in their plasma tourch controller.
>
>thanks
>dan k
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
>Moderator: pentam@... indigo_red@... [Moderators]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>bill
>List Mom
>List Owner
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>