Re: [CAD_CAM_EDM_DRO] Re: Converting Router into Laser Cutter CNC

Thanks.

skykotech <rick@...> wrote:I have played around with some smallish CO2 lasers (10 to 50 watts).
You probably will want to use your router if you are used to cutting
thick material. A 50 watt laser is only good for about 1/4 inch ply
or so. New, you are looking at about $3000 for a 10 watt to about
$8,000 to $10,000 for the 50 watt. Sometimes you can get lucky on
ebay (I picked up a new compact 15 watt sealed rf unit for $440 on
ebay). You also need a lens out of suitable material, either
germanium or znse to transmit the far IR (10,600nm). They can run
several hundred dollars. Fortunatly ebay is a very good place for
these right now. I picked up about 4 for under $50 each.

The good thing about CO2 is that it is absorbed by clear glass and
clear plastic. This makes it easier to build a suitable safe
enclosure for your router, and also makes home depot a cheap source
for your safety goggles. :-)




--- In CAD_CAM_EDM_DRO@yahoogroups.com, bank haam
wrote:

> Hi Group,
>
> I'm really tire of running the router. It screams too loud.

Instead of using the router, I would like to convert into Laser.
Does anyone done this before ? What do I need to put this
together ? Is there a kit that I can assemble to replace this
Router ? (Done Research but needed expert advice).

>
> Best Regard,
>
> BL
>
>
> ---------------------------------
> Do you Yahoo!?
> The New Yahoo! Shopping - with improved product search
>
> [Non-text portions of this message have been removed]

Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/




---------------------------------
Do you Yahoo!?
The New Yahoo! Shopping - with improved product search

[Non-text portions of this message have been removed]