Re: DynaMyte 2400 to RS232 CONNECTION?

I would suggest using hardware handshaking (CTS\RTS), you can opt to
short these two pins together on the Dyna end of the connector to
have no handshaking. I've posted a Download Program I'm working on
for the Dyna Mill in the Files Section (DynaComm). You'll need to
install the .NET framework before it will work. .NET framework is
free download from MS. BTW, in the next couple weeks I'll have an
updated version to post that adds the ability to change Com settings
and save all user selectable settings.

If you have firmware version 4859 you will not be able to download
using HyperTerminal. It uses a strange handshaking format that is
not documented (not even Dyna knows how it works!).

One other thing that I've discoverd with firmware 15fc is that Line
Execute mode does not work correctly. It will not create an arc
correctly. 15fc does have a block execute mode that is not
documented as well.

Jeff Birt

--- In CAD_CAM_EDM_DRO@yahoogroups.com, bank haam <y2kknight@y...>
wrote:

> Try 2400-N-8-1 on Xp, should be the same for other OS.
>
> Ben
>
> nltnme_2 <nltnme_2@y...> wrote:
> I am exploring connecting a Dyna 2400 to a computer.
>
> I have the manual, but it does not explain connecting to a computer
> very well.
>
> I have a pin out diagram. I would like to use hyper terminal to
> upload and down load instructions.
>
> Does anyone know the correct settings for hyper terminal on Win2000
> system?
>
> thanks in advance
>
> nltnme
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@a...,

timg@k...

> Moderator: pentam@c... indigo_red@q... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:

aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach
it if you have trouble.

> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be

a sister site to the CCED group, as many of the same members are
there, for OT subjects, that are not allowed on the CCED list.

>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING

THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........

> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to

http://docs.yahoo.com/info/terms/

>
>
>
> ---------------------------------
> Do you Yahoo!?
> The New Yahoo! Shopping - with improved product search
>
> [Non-text portions of this message have been removed]