no spindle control req'd for thread milling
Posted by
Doug Fortune
on 2003-11-08 15:00:36 UTC
"C.S. Mo" wrote in CCED: <New to servos, please help/advise?>
thread milling. You do need:
- an appropriate cutter, running at approx the correct rpm
- 3 axis control to do simultaneous X,Y & Z motion (ie helical plunge)
which will do both internal and external milled threads. For both
internal and external milled threads, remember you have to pull back
from the threads at the bottom of the cut, before retracting Z.
cheers
Doug Fortune
http://www.cncKITS.com home of the 1KW BEaST power supply kit for Geckos
.
>Nope, you don't need cnc (ie precise) control over the spindle to do
> My understanding, from the recent long discussion here, is that in order
> to do thread milling, you will need control over the spindle as well as Z.
thread milling. You do need:
- an appropriate cutter, running at approx the correct rpm
- 3 axis control to do simultaneous X,Y & Z motion (ie helical plunge)
which will do both internal and external milled threads. For both
internal and external milled threads, remember you have to pull back
from the threads at the bottom of the cut, before retracting Z.
cheers
Doug Fortune
http://www.cncKITS.com home of the 1KW BEaST power supply kit for Geckos
.