CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] How do i pick out a transformer?

on 2003-11-14 14:30:55 UTC
You may want to look at the Plitron web page www.plitron.com.

First of all, have you ever measured your local power outlet. Don't make
the mistake like I did several years ago thinking that it was 110. In fact
mine was over 125. Make sure that you calculate for worst case if the
output is going to be very close to the maximum of the drive. I always like
to stay at least 10% below the max.

To calculate the voltage that you will need from the transformer, divide the
output by 1.4. This will give you the transformer RN\MS voltage.

Bob Campbell
http://www.campbelldesigns.com
Breakout Boards
VisualMill 5.0 basic
----- Original Message -----
From: "twoextrememachine" <twoextrememachine@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, November 14, 2003 11:58 AM
Subject: [CAD_CAM_EDM_DRO] How do i pick out a transformer?


> I'm finally ready to build a power supply which doesn't appear to be
> to difficult. But, I am having issues picking out a toroid
> transformer. I know i have approx 110VAC or the wall socket, and I
> need 100VDC and 20amps, which is the max for a rutex drive of course
> slightly underpowering my motors which i feel fine about. I'd rather
> under juice them than have the ability to over juice them. So when I
> look at transformers what should I look for, to get the desired
> output? I can handle the rest with the bridge rectifier and
> capacitor.
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>

Discussion Thread

twoextrememachine 2003-11-14 13:41:51 UTC How do i pick out a transformer? Dan 2003-11-14 14:00:47 UTC Re: [CAD_CAM_EDM_DRO] How do i pick out a transformer? turbulatordude 2003-11-14 14:18:44 UTC Re: How do i pick out a transformer? Robert Campbell 2003-11-14 14:30:55 UTC Re: [CAD_CAM_EDM_DRO] How do i pick out a transformer? Jon Elson 2003-11-14 22:24:06 UTC Re: [CAD_CAM_EDM_DRO] How do i pick out a transformer? Robert Miller 2003-11-15 22:48:49 UTC Re: How do i pick out a transformer? Jon Elson 2003-11-16 14:11:02 UTC Re: [CAD_CAM_EDM_DRO] Re: How do i pick out a transformer? Tim Goldstein 2003-11-16 18:05:27 UTC RE: [CAD_CAM_EDM_DRO] How do i pick out a transformer? JanRwl@A... 2003-11-17 18:00:48 UTC Re: [CAD_CAM_EDM_DRO] Re: How do i pick out a transformer?