Re: [CAD_CAM_EDM_DRO] Gantry Wood Router

You will need two drivers in slave mode with Mach2.

Bob Campbell
http://www.campbelldesigns.com
Breakout Boards
VisualMill 5.0 basic

----- Original Message -----
From: "mij_gib" <mij_gib@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Monday, December 08, 2003 7:49 PM
Subject: [CAD_CAM_EDM_DRO] Gantry Wood Router


> I am designing a wood router using a gantry with a stepper motor on
> each side in the "X" direction. My question is:
>
> Do I need a driver and controller for each one or can they be hooked
> together?
>
> Some software( MACH2) have a slave feature. Can this feature be used
> without individual drivers and controllers?
>
> Thank you
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>