CAD CAM EDM DRO - Yahoo Group Archive

Re: Poor man DRO

on 2003-12-17 07:25:16 UTC
Sounds like a neat project, but........
If you want a GREAT, Inexpensive DRO, then you need to get the
ShumaTech 350DRO for Chinese scales. They work great!!!! You can not
beat the value!!!!! Price and Features!!!!!!!!!!!!!!
They have their own group at http://groups.yahoo.com/group/ShumaTech/
This is in kit form. You must build it yourself.
I have three. I am not affiliated the ShumaTech in any way... other
than belonging the that group also & owning the dro's.
Thanks, Tim Bostic



--- In CAD_CAM_EDM_DRO@yahoogroups.com, dvls333@y... wrote:
> Sometime ago i have find a site with the subject of making a DRO
> using a mouse and software (encode5) for dos.
> After some testing it seems to be ok, and i start to built some
> gearing mechanism to give me 0,1 mm accuracy (divide that with the
> quadrature sensors final res was 0,025mm.
> but after instalation the y axis worked fine the x axis sometimes
> worked sometimes not,i have test 6 different mouse and i get more
> wierd results if i turn the handwheel fast is accurate but if i
turn
> it slow it misses.Any suggestions?
> I have solder the sensors with a 25 cm cable from the original pcb,
> the cable is from a mouse, i made the encoder wheels but to the
same
> dimensions as the smaller one found in a mouse.
> I have aligned the sensors perfectly.

Discussion Thread

dvls333@y... 2003-12-17 06:58:06 UTC Poor man DRO luvindaddy@y... 2003-12-17 07:25:16 UTC Re: Poor man DRO Jon Elson 2003-12-17 10:09:24 UTC Re: [CAD_CAM_EDM_DRO] Poor man DRO tecnoconsult@t... 2003-12-17 11:59:36 UTC Re: Poor man DRO