Re: step/dir inputs to servo controllers
Posted by
industrialhobbies
on 2003-12-18 20:16:22 UTC
I don't know much about the logosol but the gecko's mostly driven by
the parallel port. Unless you want to do some custom robotic stuff,
cut the end off an old printer cable to hook up the geckos and you're
good to go.
Thanks
Aaron Moss
www.IndustrialHobbies.com
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "heliarc_bob"
<heliarc_bob@y...> wrote:
the parallel port. Unless you want to do some custom robotic stuff,
cut the end off an old printer cable to hook up the geckos and you're
good to go.
Thanks
Aaron Moss
www.IndustrialHobbies.com
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "heliarc_bob"
<heliarc_bob@y...> wrote:
> I have been looking at some servo controllers and have found some
> that take step & direction inputs as opposed to the analog control
> input. For example:
>
> http://www.logosolinc.com/download/ls-174wp.pdf
>
> It seems that these servo controllers (and the Geckos) could be
> driven from a PC with a parallel port. Is this how most hobbiests
> put together servo-based CNC systems?
>
> Thanks for help.
>
> Best,
> Bob
Discussion Thread
heliarc_bob
2003-12-18 15:47:51 UTC
step/dir inputs to servo controllers
Thomas Powell
2003-12-18 17:49:23 UTC
Re: [CAD_CAM_EDM_DRO] step/dir inputs to servo controllers
industrialhobbies
2003-12-18 20:16:22 UTC
Re: step/dir inputs to servo controllers
heliarc_bob
2003-12-19 08:12:25 UTC
Re: step/dir inputs to servo controllers
bull2003winkle
2003-12-19 14:41:21 UTC
Re: step/dir inputs to servo controllers
John Hebel
2003-12-19 20:27:51 UTC
Re: step/dir inputs to servo controllers
bull2003winkle
2003-12-19 22:39:33 UTC
Re: step/dir inputs to servo controllers
bull2003winkle
2003-12-19 22:50:37 UTC
Re: step/dir inputs to servo controllers
Jon Elson
2003-12-20 13:25:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: step/dir inputs to servo controllers