CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Capacitor safety questions

Posted by Jon Elson
on 2003-12-27 22:07:20 UTC
Torsten wrote:

>Jon, I have a very similar setup and got buzzed a few times and
>like to find out more on the "bleeder resistors" you mensioned
>my system retains power when unpluged for more then 24 hours and
>I think this may be the answer to my problem.
>What I am looking for is something that will drain power after
>shutoff in about an hour or earlier so I can work on it.
>
A resistor of 25 W and 1000 Ohms wired across the power supply should
drain it in a minute or less. Also, an LED with a 10,000 Ohm 2 Watt
resistor
in series with it will give a visual indication when it is still charged.

>Will this bleeder resistor reduce power output during normal
>opperation?
>
No, it takes such a small current, it will have no effect except the
production
of some heat.

Digi-Key is a great resource, also Mouser. You can order from either of
these
through the net.

Jon

Discussion Thread

volitan712003 2003-12-26 18:29:06 UTC Capacitor safety questions bull2003winkle 2003-12-26 18:44:36 UTC Re: Capacitor safety questions Jon Elson 2003-12-26 22:12:35 UTC Re: [CAD_CAM_EDM_DRO] Capacitor safety questions wanliker@a... 2003-12-26 22:16:33 UTC Re: [CAD_CAM_EDM_DRO] Capacitor safety questions Torsten 2003-12-26 23:03:26 UTC Re: Capacitor safety questions turbulatordude 2003-12-27 05:19:38 UTC Re: Capacitor safety questions John Johnson 2003-12-27 06:45:31 UTC Re: [CAD_CAM_EDM_DRO] Re: Capacitor safety questions volitan712003 2003-12-27 08:01:50 UTC Re: Capacitor safety questions ballendo 2003-12-27 08:27:21 UTC Re: Capacitor safety questions Richard L. Wurdack 2003-12-27 08:27:48 UTC Re: [CAD_CAM_EDM_DRO] Re: Capacitor safety questions Robin Szemeti 2003-12-27 09:03:02 UTC Re: [CAD_CAM_EDM_DRO] Re: Capacitor safety questions Richard 2003-12-27 10:27:29 UTC Re: Capacitor safety questions Mariss Freimanis 2003-12-27 12:03:02 UTC Re: Capacitor safety questions washcomp 2003-12-27 14:05:57 UTC Re: Capacitor safety questions OT Jon Elson 2003-12-27 22:07:20 UTC Re: [CAD_CAM_EDM_DRO] Re: Capacitor safety questions bull2003winkle 2003-12-28 00:15:40 UTC Capacitor safety questions End of response ballendo 2003-12-28 10:31:45 UTC Re: Capacitor safety questions wanliker@a... 2003-12-28 11:36:05 UTC Re: [CAD_CAM_EDM_DRO] Capacitor safety questions End of response mayfieldtm 2003-12-29 07:41:43 UTC Re: Capacitor safety questions OT