RE: [CAD_CAM_EDM_DRO] PIC DRO stupid question #2
Posted by
Tim Barnard
on 2000-04-07 22:28:21 UTC
-----Original Message-----
From: Jon Elson [mailto:jmelson@...]
Sent: Thursday, April 06, 2000 10:42 PM
To: CAD_CAM_EDM_DRO@egroups.com
Subject: Re: [CAD_CAM_EDM_DRO] PIC DRO stupid question #2
The spar and glass are the least expensive parts of the total unit. The
encoder is most costly since it has all the electronics, casting and
precision carriage.
and scale and not really worth the paperwork involved.
Most do not have a clue what they have or don't have in their stock.
------------------------------------------------------------------------
GET A NEXTCARD VISA, in 30 seconds! Get rates as low as 2.9%
Intro or 9.9% Fixed APR and no hidden fees. Apply NOW!
http://click.egroups.com/1/936/2/_/423600/_/955086013/
------------------------------------------------------------------------
Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems in the above catagories.
To Unsubscribe, read archives, change to or from digest.
Go to: http://www.onelist.com/isregistered.cgi
Log on, and you will go to Member Center, and you can make changes there.
For the FAQ, go to http://www.ktmarketing.com/faq.html
bill,
List Manager
From: Jon Elson [mailto:jmelson@...]
Sent: Thursday, April 06, 2000 10:42 PM
To: CAD_CAM_EDM_DRO@egroups.com
Subject: Re: [CAD_CAM_EDM_DRO] PIC DRO stupid question #2
>Generally, the scales can be cleaned, if only oil has gotten in. Somenot >very likely one would replace the scale, only.
>will handle some water, too. But, abrasive grit will wipe out most of the
>optical scales. Since the main grating is the most expensive part, it is
The spar and glass are the least expensive parts of the total unit. The
encoder is most costly since it has all the electronics, casting and
precision carriage.
>But, I'm sure Teledyne/Gurley and Heidenhain would sell the spar andThey will not under normal conditions. They is very little profit in a spar
>scale as a unit, and you supply the remaining pieces from your old
>unit.
and scale and not really worth the paperwork involved.
>But, you'd get no warranty that way. I suspect there are graveyards of oldgo.
>scales in machine rebuilder's shops, but they may be unwilling to let them
Most do not have a clue what they have or don't have in their stock.
>JonTim
------------------------------------------------------------------------
GET A NEXTCARD VISA, in 30 seconds! Get rates as low as 2.9%
Intro or 9.9% Fixed APR and no hidden fees. Apply NOW!
http://click.egroups.com/1/936/2/_/423600/_/955086013/
------------------------------------------------------------------------
Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems in the above catagories.
To Unsubscribe, read archives, change to or from digest.
Go to: http://www.onelist.com/isregistered.cgi
Log on, and you will go to Member Center, and you can make changes there.
For the FAQ, go to http://www.ktmarketing.com/faq.html
bill,
List Manager
Discussion Thread
ptengin@a...
2000-04-06 14:56:01 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO stupid question #2
Jon Elson
2000-04-06 22:40:13 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO stupid question #2
Tim Barnard
2000-04-07 22:28:21 UTC
RE: [CAD_CAM_EDM_DRO] PIC DRO stupid question #2
paul@a...
2000-04-08 10:12:21 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO stupid question #2