CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] need advice on building a CNC system

Posted by Mike Hammel
on 2004-01-06 19:12:33 UTC
Brian,

Email me off line, I'll help you get started.

Mike Hammel
1704 Bullard
Arkansas City, KS
67005
----- Original Message -----
From: "mtechserv" <bmince@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Tuesday, January 06, 2004 7:33 PM
Subject: [CAD_CAM_EDM_DRO] need advice on building a CNC system


> I'm planning to build a CNC mill and would like to receive advice
> from some experienced people.
>
> The mill will be used in my home shop to do prototyping work. I've
> researched the Grizzly machines (I live about 20 miles from the PA
> facility) and decided that I will probably use the G6760 or G9901
> mills based on table size / travel. Both of the mills are similar in
> design to a Bridgeport, but the 6760 is a bit smaller.
>
> The mill will mostly perform 2 1/2D machining, but I would like to
> have the ability to also do 3D contouring. I will be cutting a wide
> range of materials including steel, aluminum, plastics, and wood.
>
> Most of my design work is performed using AutoCAD, Autodesk Inventor,
> and Rhino 3D. I need some suggestions on the best software to use for
> converting these formats to G code.
>
> I would like to be able to hold tolerances to .001" / in.
>
> I have some manual machining equipment and can fabricate motor
> mounts, brackets, etc.
>
> Any help would be greatly appreciated.
>
>
> Thanks,
>
> Brian
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/
>
> To unsubscribe from this group, send an email to:
> CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
>
>
>

Discussion Thread

mtechserv 2004-01-06 18:16:16 UTC need advice on building a CNC system wanliker@a... 2004-01-06 18:39:03 UTC Re: [CAD_CAM_EDM_DRO] need advice on building a CNC system Mike Hammel 2004-01-06 19:12:33 UTC Re: [CAD_CAM_EDM_DRO] need advice on building a CNC system