CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Questions about EMC

Posted by Robin Szemeti
on 2004-01-13 06:53:28 UTC
On Tuesday 13 January 2004 00:26, dakota8833 wrote:

> I use EMC everyday. My biggest complaint ,... problems with improper
> shut downs and restarts. Sometimes I get a message about file problems
> that are force checked ( pass), then all is well . But if I get
> "FAILED" all is lost., I have to reinstall.

This is not really an EMC issue, its a 'general computing' problem .. The
answer is quit pulling the power from your computer while it is on!! If your
power is that flaky, run with a UPS, but NEVER just pull the power on a PC
(and thats Windows, Linux, Mac .. whatever) because sooner or later, you are
going to end up with a dead machine, as you have already discovered!!

Simply typing 'poweroff' in a console or logging off and selecting 'power
down' are the recommended ways to bring an EMC system to sleep, just killing
the power is most certainly NOT recommended.

Personally I leave the machine running EMC on all the time, with a UPS, and
simply de-power the steppers when I'm not using it .. currently its been on
for nearly 4 months ...

I've seen a couple of people rig their machines up so the emergency stop
killed the computer power ... I have no idea why they did that. none of them
lasted the distance.

--
Redpoint Consulting Limited

Real Solutions for a Virtual World
http://www.redpoint.org.uk

Discussion Thread

Ray Henry 2004-01-12 06:15:19 UTC Questions about EMC Jon Elson 2004-01-12 08:57:08 UTC Re: [CAD_CAM_EDM_DRO] Questions about EMC dakota8833 2004-01-12 16:26:38 UTC Re: Questions about EMC stokessd 2004-01-13 06:50:16 UTC Re: Questions about EMC Robin Szemeti 2004-01-13 06:53:28 UTC Re: [CAD_CAM_EDM_DRO] Re: Questions about EMC