RE: [CAD_CAM_EDM_DRO] spindle speed controller
Posted by
Peter Homann
on 2004-01-15 22:03:26 UTC
Hi,
If you can wait 3 or 4 weeks I should have something available. It's a small
upgrade board that will fit into a Sherline speed controller housing that
will let you control the spindle speed via the PWM speed output from Mach2
or via a step/dir signal.
I'm just waiting on the prototype boards from the pcb house.
Cheers,
Peter Homann
mailto:Peter.Homann@...
Adacel Technologies Limited,
250 Bay St, BRIGHTON, 3186, AUSTRALIA
http://www.adacel.com <http://www.adacel.com>
Telephone +61 (3) 8530 7777, Facsimile +61 (3) 9596 2960
Mobile 0421-601 665
If you can wait 3 or 4 weeks I should have something available. It's a small
upgrade board that will fit into a Sherline speed controller housing that
will let you control the spindle speed via the PWM speed output from Mach2
or via a step/dir signal.
I'm just waiting on the prototype boards from the pcb house.
Cheers,
Peter Homann
mailto:Peter.Homann@...
Adacel Technologies Limited,
250 Bay St, BRIGHTON, 3186, AUSTRALIA
http://www.adacel.com <http://www.adacel.com>
Telephone +61 (3) 8530 7777, Facsimile +61 (3) 9596 2960
Mobile 0421-601 665
> -----Original Message-----
> From: felixdkat2002 [mailto:ebay@...]
> Sent: Friday, 16 January 2004 4:05 PM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: [CAD_CAM_EDM_DRO] spindle speed controller
>
>
> sherline mill, but i think the question might still apply here...
>
> how do you set up a speed control interface for your spindle??
>
> is there a commercial product or a free schematic??
>
> looking thru the archived messages someone mentions some i2c
> (whatever that is...noobe here) but i cant find any details...
>
> i would rather breadboard a simple control if possible instead of
> spending hundreds of dollars...
>
> thanks,
> any input apprecitated,
> fdk
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> wanliker@..., timg@...
> Moderator: pentam@... indigo_red@...
> davemucha@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this
> to be a sister site to the CCED group, as many of the same
> members are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
> EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/
>
> To unsubscribe from this group, send an email to:
> CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
>
>
>
Discussion Thread
felixdkat2002
2004-01-15 21:21:29 UTC
spindle speed controller
Peter Homann
2004-01-15 22:03:26 UTC
RE: [CAD_CAM_EDM_DRO] spindle speed controller
james_cullins@s...
2004-01-16 06:07:34 UTC
Re: [CAD_CAM_EDM_DRO] spindle speed controller
ballendo
2004-01-16 09:08:48 UTC
Re: spindle speed controller