Re: [CAD_CAM_EDM_DRO] Camtronics offerings, was:AMAZING STUFF!

Yes the Tachometer boards are in. They are silkscreened on both sides and
have solder masks. I put one together and it works great. The dual optical
sensor will be great for shoptask/smithy users that have the dual motor set
ups. Flip a switch to up for the mill head and flip the switch down for the
lathe. It will work great on Sherlines and the Maxnc machines or really any
machine with or without variable speed. The chart on my floor drill press is
so lousy that this tack really make it a joy to set the RPM where I want
it.using a single sensor.
Right now I am finishing up the documentation. I'll have it done today and I
should have the prices up on my web site tonight hopefully with some
pictures. The Tach display can be had with either a RED or a Green display.
The Green is soft on the eyes but the red really shows up.
Dan
-----Original Message-----
From: Tim Goldstein <timg@...>
To: CAD_CAM_EDM_DRO@onelist.com <CAD_CAM_EDM_DRO@onelist.com>
Date: Saturday, April 08, 2000 7:35 PM
Subject: RE: [CAD_CAM_EDM_DRO] Camtronics offerings, was:AMAZING STUFF!

>Hey Dan,
>
>I have been checking your site to see if there is any news on the tach
>and/or the new controller. You have on your site that you expected the tach
>boards on the 6th. Have you gotten them? Do you have pricing? Can you tell
>us what the features of each product is?
>
>Thanks,
>
>Tim
>[Denver, CO]
>
>timg@... <mailto:timg@...>
>http://www.ktmarketing.com
>
>
>> -----Original Message-----
>> From: Dan Mauch [mailto:dmauch@...]
>> Sent: Friday, March 10, 2000 7:51 AM
>> To: CAD_CAM_EDM_DRO@onelist.com
>> Subject: Re: [CAD_CAM_EDM_DRO] AMAZING STUFF!
>>
>>
>> From: "Dan Mauch" <dmauch@...>
>>
>> There are several new items that will soon be available.
>> 1. DESKNC RT using emc in a DOS Real Time version so you can eliminate

all

>> that unix/linux drugery. It will have a 140 line look ahead and
>> and supports
>> all the G code listed in EMC. I am currently testing a copy of
>> it. A future
>> version will also have the DRO board used for stepper motor feedback!
>> It is not ready yet ( will be ready in about a week) so please no email.
>> 2. A low cost optical tachometer based on Hans Wedmeyer's design (with

his

>> permission). It will be a kit with single or dual IR optical
>> sensors. Great
>> for Shoptask like machines or any other variable speed machine such as
>> Sherline/Maxnc or where the Chinese label plate is all wrong. Should be
>> available in 3 weeks.
>> 3. A new single axis 5A chopper driver with auto current
>> reduction and all
>> winding off 1/4 / 1/2 or 1/2 / full steps
>> Please no email at this time.
>> So little time . So many machines to build!
>>
>> Dan
>>
>
>
>------------------------------------------------------------------------
>DON'T HATE YOUR RATE!
>Get a NextCard Visa, in 30 seconds! Get rates as low as
>0.0% Intro or 9.9% Fixed APR and no hidden fees.
>Apply NOW!
>http://click.egroups.com/1/2120/2/_/423600/_/955247769/
>------------------------------------------------------------------------
>
>Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the

discussion of shop built systems in the above catagories.

>To Unsubscribe, read archives, change to or from digest.
>Go to: http://www.onelist.com/isregistered.cgi
>Log on, and you will go to Member Center, and you can make changes there.
>For the FAQ, go to http://www.ktmarketing.com/faq.html
>bill,
>List Manager
>
>