Re: [CAD_CAM_EDM_DRO] digital caliper

Hi Ian,
I downloaded pictures of the caliper to our file site here is the address
http://www.onelist.com/files/CAD_CAM_EDM_DRO/caliper/
you will have to magnify the pictures to see the details.

Derek

Subject: Re: [CAD_CAM_EDM_DRO] digital caliper

>Hi Derek,
>
>You don't have a digital camera or a scanner available to put pictures of
>your caliper on the web site do you? It would probably be of interest to
>some of us and may give us some inspiration for the DRO project. There was
>anote a few weeks ago of the Mitutoyo patent covering the digital caliper
>design. Its quite a long document and, since my printer for some reason
>decided to print it at about half size, its taking some time for me to get
>through it but from your description, it seems your instrument may use a
>variation of their technology.
>
>Ian
>
>--
>Ian W. Wright
>Sheffield UK
>
>
>----- Original Message -----
>From: derek barger <hightechsystems@...>
>To: <cAD_CAM_EDM_DRO@...>
>Sent: 09 April 2000 02:47
>Subject: [CAD_CAM_EDM_DRO] digital caliper
>
>
>> hi all,
>> I just took my digital caliper apart it is very simple in design but I am
>> not sure how it works completely. This may be the cheapest DRO if you can
>> make them. The circuit board had a single CPU chip under epoxy. The

sensor

>> area was very small through holes
>
>
>
>------------------------------------------------------------------------
>DON'T HATE YOUR RATE!
>Get a NextCard Visa, in 30 seconds! Get rates as low as
>0.0% Intro or 9.9% Fixed APR and no hidden fees.
>Apply NOW!
>http://click.egroups.com/1/2120/2/_/423600/_/955272434/
>------------------------------------------------------------------------
>
>Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the

discussion of shop built systems in the above catagories.

>To Unsubscribe, read archives, change to or from digest.
>Go to: http://www.onelist.com/isregistered.cgi
>Log on, and you will go to Member Center, and you can make changes there.
>For the FAQ, go to http://www.ktmarketing.com/faq.html
>bill,
>List Manager
>