Re: Jerrys Power Supply.pdf
Posted by
machinist24540
on 2004-02-10 09:15:41 UTC
Thanks, John.
Do you think that would pull all 3 (1150 oz-in) steppers
simultaneously?
--- In CAD_CAM_EDM_DRO@yahoogroups.com, John Johnson <johnatl@m...>
wrote:
Do you think that would pull all 3 (1150 oz-in) steppers
simultaneously?
--- In CAD_CAM_EDM_DRO@yahoogroups.com, John Johnson <johnatl@m...>
wrote:
> The transformers are 10 amps, the rectifier is 12 amps, so theweakest
> link is the transformer.is
>
> If transformers are connected in series (adding), then voltage out
> the sum of the voltages. The current is that of the lowest ratedof the
> transformer. When connecting in parallel, the current is the sum
> currents, The voltage of all transformers in parallel should bethe
> same, and that will be the output voltage.liberally.
>
> The schematic doesn't show any fuses. I sprinkle them about
> One on each input leg of the transformer, one on each output legof the
> transformer, and one on the DC in for each driver.wanliker@a...,
>
> Regards,
> JJ
>
> On Sunday, Feb 8, 2004, at 20:03 US/Eastern, machinist24540 wrote:
>
> > Hello,
> > Can anyone tell me how many amps the power supply in the files
> > section Jerrys Power Supply.pdf will put out? It is under the
> > circuits folder.
> > I am looking to hook up a rotary table that usus a standard
> > Bridgeport stepper motor.
> > Also would it power a 3 or 4 motors if I used it to upgrade
> > my BOSS 3?
> > Thanks,
> > John
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> > timg@k...reach
> > Moderator: pentam@c... indigo_red@q... davemucha@j...
> > [Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> > it if you have trouble.to be
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this
> > a sister site to the CCED group, as many of the same members arePOSTING
> > there, for OT subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> > THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NOEXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
Discussion Thread
machinist24540
2004-02-08 17:03:21 UTC
Jerrys Power Supply.pdf
John Johnson
2004-02-09 15:14:54 UTC
Re: [CAD_CAM_EDM_DRO] Jerrys Power Supply.pdf
machinist24540
2004-02-10 09:04:23 UTC
Re: Jerrys Power Supply.pdf
machinist24540
2004-02-10 09:15:41 UTC
Re: Jerrys Power Supply.pdf
John Johnson
2004-02-10 09:56:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: Jerrys Power Supply.pdf
machinist24540
2004-02-22 17:29:01 UTC
Re: Jerrys Power Supply.pdf
james_cullins@s...
2004-02-22 19:42:29 UTC
Re: [CAD_CAM_EDM_DRO] Re: Jerrys Power Supply.pdf