Re: joystick control two axis stage (More)
Posted by
caudlet
on 2004-03-07 07:34:04 UTC
While the PulseCard project I referred you to will provide the raw
step and direction output pulses for what you want, you will still
need to provide the power interface to the motors. Depending on the
size and rating of the motors you will need to look at somthing like
the Xylotex single axis cards or their 3 in 1 axis card. The signals
will interface easily between the two. There are also several
unipolar stepper drive kits and plans that would work.
step and direction output pulses for what you want, you will still
need to provide the power interface to the motors. Depending on the
size and rating of the motors you will need to look at somthing like
the Xylotex single axis cards or their 3 in 1 axis card. The signals
will interface easily between the two. There are also several
unipolar stepper drive kits and plans that would work.
Discussion Thread
Greg McCreight
2004-03-06 22:51:55 UTC
joystick control two axis stage
Bob McKnight
2004-03-07 07:17:43 UTC
Re: [CAD_CAM_EDM_DRO] joystick control two axis stage
caudlet
2004-03-07 07:27:02 UTC
Re: joystick control two axis stage
caudlet
2004-03-07 07:34:04 UTC
Re: joystick control two axis stage (More)
ibewgypsie
2004-03-07 08:14:11 UTC
Re: joystick control two axis stage (More)
caudlet
2004-03-07 11:30:50 UTC
Re: joystick control two axis stage (More)
james_cullins@s...
2004-03-07 12:27:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: joystick control two axis stage (More)