Re: where to buy pillow-block bearings
Posted by
ballendo
on 2004-03-11 06:34:43 UTC
Lee,
These bearings typically are inserted into a hole in a part which
provides mounting points. This could be integral to the machine; or
more typically as seen in this picture from the same seller. The
bearings you link to are the same--except for diameter--as those
found in this auction: Ebay item number 3802507121
Be careful of the plastic bodied bearings which this seller also
shows in another auction--the ones with metal plates. Unlike the one
you posted and my reply above, these plastic bodied type need the
housing--the hole inner surface-- to carry the loads of the bearing.
(the types above can carry most of the load with their steel hardened
and ground shell, so you can mount them only partially inserted into
soft material.
Hope this helps,
Ballendo
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Lee Leathers"
<leeleathers@c...> wrote:
These bearings typically are inserted into a hole in a part which
provides mounting points. This could be integral to the machine; or
more typically as seen in this picture from the same seller. The
bearings you link to are the same--except for diameter--as those
found in this auction: Ebay item number 3802507121
Be careful of the plastic bodied bearings which this seller also
shows in another auction--the ones with metal plates. Unlike the one
you posted and my reply above, these plastic bodied type need the
housing--the hole inner surface-- to carry the loads of the bearing.
(the types above can carry most of the load with their steel hardened
and ground shell, so you can mount them only partially inserted into
soft material.
Hope this helps,
Ballendo
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Lee Leathers"
<leeleathers@c...> wrote:
> I need some pillow-block bearings. What e-store can I get thesefrom..
> besides mcmaster... ;) I want inexpensive :)ViewItem&item=3802496970&category=11810
>
> I was also thinking about:
> http://cgi.ebay.com/ws/eBayISAPI.dll?
>
> but how would I mount anything to those?
>
> thanks-Lee-
Discussion Thread
Lee Leathers
2004-03-09 20:58:04 UTC
where to buy pillow-block bearings
Dale Emery
2004-03-09 22:36:29 UTC
Re: [CAD_CAM_EDM_DRO] where to buy pillow-block bearings
Lee Leathers
2004-03-09 22:46:11 UTC
Re: [CAD_CAM_EDM_DRO] where to buy pillow-block bearings
Erie Patsellis
2004-03-10 06:03:43 UTC
Re: [CAD_CAM_EDM_DRO] where to buy pillow-block bearings
alex
2004-03-10 06:56:34 UTC
Re: [CAD_CAM_EDM_DRO] where to buy pillow-block bearings
zeff1015@a...
2004-03-10 08:25:45 UTC
Re: [CAD_CAM_EDM_DRO] where to buy pillow-block bearings
ballendo
2004-03-11 06:34:43 UTC
Re: where to buy pillow-block bearings
jdmullett
2004-03-12 08:11:50 UTC
Re: where to buy pillow-block bearings
jdmullett
2004-03-12 08:12:59 UTC
Re: where to buy pillow-block bearings