Re: Step and direction conversion to + - 10v dc

--- In CAD_CAM_EDM_DRO@yahoogroups.com, "brunoian1127" <dr@d...>
wrote:

> On some servo drive units the input requires + - 10v not step and
> direction. Is there a unit (inexpensive) that can had to either
> convert the step and direction to + or - 10v ... or that outputs +
> or minus 10v dc to run this style of drive that will work with
> controls like desknc, mach1 etc?

See www.rutex.com . They ahev one for around $100. I have one but
have not implemented it yet.

Roger