Re: [CAD_CAM_EDM_DRO] CNC on a budget spindles. (Very good product and price!)

I agree, I have purchased from Paul at CNConabudget.com in the past and the product was well worth the price, and I plan to buy in the future.



Thanks

John Skapura

james_cullins@... wrote:I have never used it but considered it at one time.
I do respect a man that will admit a mistake and get it corrected, this is
good.
If the need comes up again for a PCB spindle I will buy one.
Jim

----- Original Message -----
From: "ballendo"
To:
Sent: Tuesday, March 30, 2004 2:34 AM
Subject: [CAD_CAM_EDM_DRO] CNC on a budget spindles. (Very good product and
price!)


> Hello,
>
> It has come to my attention(a coupla minutes ago) that some orders
> were cancelled for The CNConabudget.com spindles, due to a post I
> made about the motor...
>
> This makes me sad.
>
> The product Paul is offering is WELL WORTH the price he is asking,
> and is of very high quality. Mine continues to work well, and the
> motor, which quality someone had questioned in the thread awhile
> back; does it's work reliably and well.
>
> In looking at my post now, I can see that someone "might" have
> thought I was saying the motor was bad. It's NOT, and I am actually
> on the "side" that believes this motor is up to the task it is sold
> for. (Others have said bad things about the motor, but in my
> experience that's simply NOT the case... Part of the REASON I posted
> was to SUPPORT the motor; not to add to it a negative cast!)
>
> The added fact that I have been able to find the same motor surplus
> inexpensively should not mean anything. (FWIW, Paul was not aware the
> motor was available surplus, and did not pay the price I mentioned
> for the motors he's been sending out.) Do we question our surplus
> steppers, drives or servo's, because we find them FAR cheaper than if
> purchased new?!?!
>
> So let me clearly state, If you cancelled an order with CNConabudget
> for a pcb spindle due to my post; IMO you made a mistake. This is a
> fine product, at a more than fair price!
>
> No one asked me to post this. It just seems the right thing to do.
>
> Hope this helps,
>
> Ballendo
>
> P.S. I found the motor locally before I had a spindle from Paul, and
> was going to use it to drive a spindle myself! The only thing that
> stopped me is that I was looking for a direct drive, and the motor
> turns the wrong way for that; something Paul has solved in his
> design. I remember feeling disappointed when after all my tests for
> torque, noise, size,etc. were complete, I "Noticed" the rotation
> would not work for me. Because the motor was very good in every other
> way. Still is. (FWIW, the motor has an integral rectifier, so it's
> not a case of just swapping the leads. I EVEN took one apart to see
> if I could reverse the rotation easily... THAT'S how much I WANTED to
> use this motor!)
>
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>




Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links







---------------------------------
Do you Yahoo!?
Yahoo! Finance Tax Center - File online. File on time.

[Non-text portions of this message have been removed]