Question on connector used on servos
Posted by
Michael Gamber
on 2004-04-05 21:51:48 UTC
I am getting ready to wire up my servos. They are DC Brush type. The
brushes have .187 quick connects. OK to use or is soldering
necessary?
Also the encoder has .100 spacing pins that appear to be gold
plated. Do you recommend getting gold plated connectors to mate with
them? I know that encoder wiring should be as fail-safe as possible,
but will gold plating buy me anything here?
brushes have .187 quick connects. OK to use or is soldering
necessary?
Also the encoder has .100 spacing pins that appear to be gold
plated. Do you recommend getting gold plated connectors to mate with
them? I know that encoder wiring should be as fail-safe as possible,
but will gold plating buy me anything here?
Discussion Thread
Michael Gamber
2004-04-05 21:51:48 UTC
Question on connector used on servos
Jon Elson
2004-04-06 09:53:28 UTC
Re: [CAD_CAM_EDM_DRO] Question on connector used on servos
JanRwl@A...
2004-04-06 13:47:31 UTC
Re: [CAD_CAM_EDM_DRO] Question on connector used on servos
John Johnson
2004-04-06 15:19:22 UTC
Re: [CAD_CAM_EDM_DRO] Question on connector used on servos
Jon Elson
2004-04-06 19:48:51 UTC
Re: [CAD_CAM_EDM_DRO] Question on connector used on servos
Mariss Freimanis
2004-04-06 21:15:50 UTC
Re: Question on connector used on servos
Jon Elson
2004-04-06 23:32:09 UTC
Re: [CAD_CAM_EDM_DRO] Re: Question on connector used on servos
Arthur Volta
2004-04-07 04:33:37 UTC
Re: [CAD_CAM_EDM_DRO] Question on connector used on servos
Andy Wander
2004-04-07 05:39:13 UTC
RE: [CAD_CAM_EDM_DRO] Question on connector used on servos
JanRwl@A...
2004-04-07 22:24:01 UTC
Re: [CAD_CAM_EDM_DRO] Question on connector used on servos
Hugh Prescott
2004-04-08 16:02:13 UTC
Re: [CAD_CAM_EDM_DRO] Question on connector used on servos
Raymond Heckert
2004-04-09 02:05:40 UTC
Re: [CAD_CAM_EDM_DRO] Question on connector used on servos