Re: [CAD_CAM_EDM_DRO] Re: 3D Scanner/ Dizitizer
Posted by
th.carel
on 2004-04-20 05:56:26 UTC
Graham
You can take a look to a zip file
I had upload it in the master5 yahoo group.
-laser probe project-
This is a test which is working as you describe
(wihout a filter,but..).
I am also coupling a basic piezo sensor (touch probe option)
instead of the laser,and I am trying to separate noise to
get a clean probing,because the device is very
very sensitive , in progress.... the last test was ok but
with more bad spikes (less than 1%) than the laser <0.001%.
hope this help.
thierry
-----Message d'origine-----
De : Graham Stabler <eexgs@...>
À : CAD_CAM_EDM_DRO@yahoogroups.com <CAD_CAM_EDM_DRO@yahoogroups.com>
Date : dimanche 18 avril 2004 19:29
Objet : [CAD_CAM_EDM_DRO] Re: 3D Scanner/ Dizitizer
you have trouble.
subjects, that are not allowed on the CCED list.
You can take a look to a zip file
I had upload it in the master5 yahoo group.
-laser probe project-
This is a test which is working as you describe
(wihout a filter,but..).
I am also coupling a basic piezo sensor (touch probe option)
instead of the laser,and I am trying to separate noise to
get a clean probing,because the device is very
very sensitive , in progress.... the last test was ok but
with more bad spikes (less than 1%) than the laser <0.001%.
hope this help.
thierry
-----Message d'origine-----
De : Graham Stabler <eexgs@...>
À : CAD_CAM_EDM_DRO@yahoogroups.com <CAD_CAM_EDM_DRO@yahoogroups.com>
Date : dimanche 18 avril 2004 19:29
Objet : [CAD_CAM_EDM_DRO] Re: 3D Scanner/ Dizitizer
>You could make something similar yourself although it would not betimg@...
>overly simple. If a decent lens or microscope objective is used to
>focus a laser beam to a point and then this point is imaged to a
>camera or photodiode then the maximum brightness is found when the
>beam is focussing onto the surface beneath, i.e. when the surface is
>at the lens focal length from the lens. You scan in Z to find this
>maximum and record the height, move over and repeat. There are
>probably other more complex ways of doing it using image correlation
>for example, I don't know just thing off the top of my head. A
>filter to remove the ambient light would also be helpful. It also
>won't work well on steep slopes.
>
>Graham
>
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
>Moderator: pentam@... indigo_red@... davemucha@...[Moderators]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DROaol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects goto:
you have trouble.
>http://www.metalworking.com/news_servers.htmlsister site to the CCED group, as many of the same members are there, for OT
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
subjects, that are not allowed on the CCED list.
>DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
>bill
>List Mom
>List Owner
>
>
>Yahoo! Groups Links
>
>
>
>
>
Discussion Thread
ruanb1
2004-04-18 08:27:30 UTC
3D Scanner/ Dizitizer
Harvey White
2004-04-18 09:18:47 UTC
Re: [CAD_CAM_EDM_DRO] 3D Scanner/ Dizitizer
Graham Stabler
2004-04-18 10:29:40 UTC
Re: 3D Scanner/ Dizitizer
reems150
2004-04-18 12:53:58 UTC
Re: 3D Scanner/ Dizitizer
Henrik Olsson
2004-04-18 13:51:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: 3D Scanner/ Dizitizer
Harvey White
2004-04-18 15:19:41 UTC
Re: [CAD_CAM_EDM_DRO] Re: 3D Scanner/ Dizitizer
caudlet
2004-04-18 16:11:55 UTC
Re: 3D Scanner/ Dizitizer
ballendo
2004-04-19 07:45:24 UTC
Re: 3D Scanner/ Dizitizer
washcomp
2004-04-19 08:15:51 UTC
Re: 3D Scanner/ Dizitizer - this one probably NG
Henrik Olsson
2004-04-19 10:41:14 UTC
Re: [CAD_CAM_EDM_DRO] Re: 3D Scanner/ Dizitizer
Henrik Olsson
2004-04-19 10:51:17 UTC
Re: [CAD_CAM_EDM_DRO] Re: 3D Scanner/ Dizitizer
Elliot Burke
2004-04-19 11:16:49 UTC
re:Re: Re: 3D Scanner/ Dizitizer
th.carel
2004-04-20 05:56:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: 3D Scanner/ Dizitizer
george_barr
2004-04-20 21:10:29 UTC
Re: 3D Scanner/ Dizitizer
ballendo
2004-04-21 09:52:56 UTC
Re: 3D Scanner/ Dizitizer