Re: 3D Scanner/ Dizitizer
Posted by
george_barr
on 2004-04-20 21:10:29 UTC
Can't you use a more accurate ADC like a 12bit ADC to get better
digitizer accuracy?
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "ballendo" <ballendo@y...>
wrote:
digitizer accuracy?
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "ballendo" <ballendo@y...>
wrote:
> Hello,able
>
> The range of this device is 10-80 CM. And the output is 0-255 (8bit
> ADC), so that's about .275" per bit. Pretty coarse...
>
> Hope this helps,
>
> Ballendo
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "caudlet" <info@t...> wrote:
> > --- In CAD_CAM_EDM_DRO@yahoogroups.com, "ruanb1" <rrbasson@t...>
> > wrote:
> > > Hi Guys
> > >
> > > Just an idea, I am thinking off. It sure would be nice to be
> > tothe
> > > have a scanning system (affordable) without the contact like
> > > probes.this
> > >
> > > I was thinking: Can one not use the distance sensors (which is
> > > cheap) mounted on the axes to fulfill this, I mean we basically
> > > would just like distances, and with software then create the
> > > models???
> > >
> > > Have any of you thought in this line or build something like
> > onof
> > > your CNC machines?
> > >
> > > It surely would not break the bank (although it might be hell
> > > slow scanning).detected
> > >
> > > Would appreciate your ideas
> > >
> > > Regards
> > >
> > > Ruan
> >
> > Take a look at:
> >
> > http://www.hvwtech.com/pages/products_view.asp?ProductID=347
> >
> > Infrared (pulsed) short distance sensor. They have several
> models.
> > Serial (RS232) output feeds back digital value of analog distance
> or
> > one model has adjustable trip point and just sends back a single
> bit
> > logic level.
> >
> > The challenges are to get past the different reflectivity of an
> > object and to determine the accuracy and repeatability.
> >
> > Ambient light is not a problem due to the module having it's own
> > infrared output and it being pulsed at a frequency that is
> > by the same receiving module. It uses a focused beam andreceiver
> at
> > angles so it can only operate in the area of convergence.
> >
> > Price is right (<30 bucks) if it is usable.
Discussion Thread
ruanb1
2004-04-18 08:27:30 UTC
3D Scanner/ Dizitizer
Harvey White
2004-04-18 09:18:47 UTC
Re: [CAD_CAM_EDM_DRO] 3D Scanner/ Dizitizer
Graham Stabler
2004-04-18 10:29:40 UTC
Re: 3D Scanner/ Dizitizer
reems150
2004-04-18 12:53:58 UTC
Re: 3D Scanner/ Dizitizer
Henrik Olsson
2004-04-18 13:51:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: 3D Scanner/ Dizitizer
Harvey White
2004-04-18 15:19:41 UTC
Re: [CAD_CAM_EDM_DRO] Re: 3D Scanner/ Dizitizer
caudlet
2004-04-18 16:11:55 UTC
Re: 3D Scanner/ Dizitizer
ballendo
2004-04-19 07:45:24 UTC
Re: 3D Scanner/ Dizitizer
washcomp
2004-04-19 08:15:51 UTC
Re: 3D Scanner/ Dizitizer - this one probably NG
Henrik Olsson
2004-04-19 10:41:14 UTC
Re: [CAD_CAM_EDM_DRO] Re: 3D Scanner/ Dizitizer
Henrik Olsson
2004-04-19 10:51:17 UTC
Re: [CAD_CAM_EDM_DRO] Re: 3D Scanner/ Dizitizer
Elliot Burke
2004-04-19 11:16:49 UTC
re:Re: Re: 3D Scanner/ Dizitizer
th.carel
2004-04-20 05:56:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: 3D Scanner/ Dizitizer
george_barr
2004-04-20 21:10:29 UTC
Re: 3D Scanner/ Dizitizer
ballendo
2004-04-21 09:52:56 UTC
Re: 3D Scanner/ Dizitizer