Re: [CAD_CAM_EDM_DRO] Lead nut slop
Posted by
RichD
on 2004-06-06 12:18:05 UTC
Troy,
Bearing bronze alloys is the proper metal. Sold by bearing houses, MSC, Enco,
etc, etc. Cored or solid. Be sure to use ****SHARP**** Tools :-)
RichD
testfly@... wrote:
Bearing bronze alloys is the proper metal. Sold by bearing houses, MSC, Enco,
etc, etc. Cored or solid. Be sure to use ****SHARP**** Tools :-)
RichD
testfly@... wrote:
>TRIMMMMMMMMMMMMMMMMMMMMMMMMMM*********************************************************
> Is there a better material for lead screw nuts than Brass?
> I have on carrage that now has 3/32" of play in the lead carrage nut.
> How can I fix this. Also my lead screws feel rough and one is really bad.
> May be why I have the play now.
> What should I do?
>
> Troy "Lead Loose" :-)
Discussion Thread
testfly@a...
2004-06-06 11:04:46 UTC
[CAD_CAM_EDM_DRO] Lead nut slop
RichD
2004-06-06 12:18:05 UTC
Re: [CAD_CAM_EDM_DRO] Lead nut slop
JanRwl@A...
2004-06-06 15:57:24 UTC
Re: [CAD_CAM_EDM_DRO] Lead nut slop
Jon Elson
2004-06-06 21:55:15 UTC
Re: [CAD_CAM_EDM_DRO] Lead nut slop
JanRwl@A...
2004-06-06 22:13:05 UTC
Re: [CAD_CAM_EDM_DRO] Lead nut slop