Re: [CAD_CAM_EDM_DRO] Re: Stepper motors only turning one direction

In a message dated 6/7/2004 11:22:25 AM Mountain Daylight Time,
gokarts164@... writes:
The 5v power is coming from the red line on the PC power supply.
Where are you getting the ground from? If you are using an external 5 volt
supply for the drives, you will need the two grounds referenced to each other.

Bu, I am not sure if there would be any problems with the two grounds
connected together
bill


[Non-text portions of this message have been removed]