Re: [CAD_CAM_EDM_DRO] Website updated

Afogassa,

They look very nice.

Bob Campbell
Bob@...
www.campbelldesigns.com
Breakout board
THC board sets
CNC router plans
Stepper Motors
VisualMill Basic

----- Original Message -----
From: "afogassa" <afogassa@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, June 16, 2004 3:38 PM
Subject: [CAD_CAM_EDM_DRO] Website updated


> Hi, All
> Just let you know, There is pictures of the machines I've made down
> here in Brasil, the first one the table moves,the bigger one the
> gantry moves.
> The one made to do Pcb,has a camtronics 2amps controller,180oz.
> motors,balscrews,round fully suported rails and a bosch router it's
> about 600mm x 500mm x 150mm Travel
> The bigger one has SBC linear rails, Rutex servo drives, and 3
> 50oz. servo motors coupled to a 4 to 1 drive belt runnig deskcnc and
> 1"dia. ballscrews,becouse of the size of the machine we have to keep
> it to a max moving rate of 200in/pmin. We had it up to 800in/pmin but
> becouse of the mass of the gantry the machine jerks a lot.
> 1000mm x1000mm x 150mm travel
> Both machines works very nice, the one for pcb was sold about 6
> months ago and still doing it's job ok. the bigger one we use on a
> every day basis, and no problem so far not a glinche.
> Can see it at http://www.maquitronic.com.br/maquinas.htm
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>