Re: [CAD_CAM_EDM_DRO] EMC problem processing Vector G-code

Does more decimal places work? I would think 5 decimal places would be more
helpful.

Daniel J. Statman, Statman Designs
www.statmandesigns.com
dan.statman@...

----- Original Message -----
From: "reed_irion" <Reed_Irion@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Saturday, July 10, 2004 8:50 PM
Subject: [CAD_CAM_EDM_DRO] EMC problem processing Vector G-code


> So when I put in this code to the EMC:
> N31 G01 X0.219 Y-0.250 F0.9
> N32 G03 X-0.250 Y0.219 I-0.469 J0.000
> N33 G01 X-4.123 Y0.219
> N34 G03 X-4.492 Y0.040 I0.000 J-0.469
> N35 G01 X-4.917 Y-0.501
> N36 G02 X-5.310 Y-0.693 I-0.393 J0.309
> N37 G01 X-7.521 Y-0.693
> N38 G03 X-7.740 Y-0.912 I0.000 J-0.219
> N39 G01 X-7.740 Y-1.412
> N40 G03 X-7.521 Y-1.631 I0.219 J0.000
> N41 G01 X-7.271 Y-1.631
> N42 G02 X-7.240 Y-1.662 I0.000 J-0.031
> N43 G01 X-7.240 Y-2.593
> N44 G03 X-6.771 Y-3.062 I0.469 J0.000
> N45 G01 X-5.256 Y-3.062
> N46 G02 X-5.095 Y-3.112 I0.000 J-0.281
> N47 G01 X-4.440 Y-3.569
> N48 G03 X-4.171 Y-3.653 I0.268 J0.385
> N49 G01 X-0.250 Y-3.653
> N50 G03 X0.219 Y-3.184 I0.000 J0.469
> N51 G01 X0.219 Y-0.250
>
> I get a "radius to end of arc differs from radius to start of arc..."
> How do I get Vector to correct the arc so that EMC will run it, or
> what do I have to adjust in the emc.ini ?
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>