help needed for modal and nonmodal g codes..
Posted by
mushtaq ahmed
on 2004-08-08 00:08:15 UTC
hi ..
we have manual five axis huron mill machine with hedenhein
controller(TNC 415).we have a little problem that when we make
programme in mastercam v9 it makes all the g codes modal means one
command is not repeated until next is needed . but our controller
does not accept this feature, with only G02 and G03 ..
it demands that in all block where G02 and G03 are
requried ,they should be placed .
this is has becoming a matter of concern for us please
help me with this.
thanks and regards
mushtaq ahmed
we have manual five axis huron mill machine with hedenhein
controller(TNC 415).we have a little problem that when we make
programme in mastercam v9 it makes all the g codes modal means one
command is not repeated until next is needed . but our controller
does not accept this feature, with only G02 and G03 ..
it demands that in all block where G02 and G03 are
requried ,they should be placed .
this is has becoming a matter of concern for us please
help me with this.
thanks and regards
mushtaq ahmed
Discussion Thread
mushtaq ahmed
2004-08-08 00:08:15 UTC
help needed for modal and nonmodal g codes..
Brad Eyben
2004-08-08 09:18:30 UTC
Re: [CAD_CAM_EDM_DRO] help needed for modal and nonmodal g codes..
mushtaq ahmed
2004-08-11 10:56:59 UTC
Re: [CAD_CAM_EDM_DRO] help needed for modal and nonmodal g codes..
cnc002@a...
2004-08-11 11:51:41 UTC
Re: [CAD_CAM_EDM_DRO] help needed for modal and nonmodal g codes..