relays
Posted by
Gene
on 2004-08-19 19:54:55 UTC
I have a axxux tech. breakout board and two relays hooked to pin 14 and
pin 17. I am using EMC with geckos. I cant figure how to control the
relays with software. is this possible? for a while the spindle would
start as soon as I turned on the power to the geckos, but now there is
no power to the relays at all. I don't have any idea what i did to make
this change. any help would be appreciated.
pin 17. I am using EMC with geckos. I cant figure how to control the
relays with software. is this possible? for a while the spindle would
start as soon as I turned on the power to the geckos, but now there is
no power to the relays at all. I don't have any idea what i did to make
this change. any help would be appreciated.
Discussion Thread
turbulatordude
2002-12-06 06:06:09 UTC
relays
Peter
2002-12-06 09:44:13 UTC
Re: [CAD_CAM_EDM_DRO] relays
Gene
2004-08-19 19:54:55 UTC
relays
Lance Hopper
2004-08-19 22:40:49 UTC
Re: relays