Re: Newbe needs help
Posted by
Keith Clark
on 2004-08-26 19:25:20 UTC
Scott,
http://www.geckodrives.com/ycom/documents/C163R21_step_motor_white_pa
per.pdf is the "white paper" describing basics of motor connections
for the Gecko drives. Page 10 says the current draw is 1/2 when
connected in series, so it seems you would wire the motor for 4.6
amps if wired in parallel. You might want to read the paper's
description of wiring 8 wire motors as well on page 8 stating the
same relationship. Hope this helps.
Keith Clark
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "cadman456" <cadman456@y...>
wrote:
4.6
http://www.geckodrives.com/ycom/documents/C163R21_step_motor_white_pa
per.pdf is the "white paper" describing basics of motor connections
for the Gecko drives. Page 10 says the current draw is 1/2 when
connected in series, so it seems you would wire the motor for 4.6
amps if wired in parallel. You might want to read the paper's
description of wiring 8 wire motors as well on page 8 stating the
same relationship. Hope this helps.
Keith Clark
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "cadman456" <cadman456@y...>
wrote:
> Newbe needs help I have an eight-wire stepper rated at 2.2 vand
4.6
> amps. If I wire it for parallel operation, what would be themaximum
> current draw? 4.6 amps or ½ of 4.6 amps?
> Thanks
>
> Scott
Discussion Thread
cadman456
2004-08-26 19:00:44 UTC
Newbe needs help
Keith Clark
2004-08-26 19:25:20 UTC
Re: Newbe needs help