Re: [CAD_CAM_EDM_DRO] Running a Bridgeport Interact 1 Mk1 on single phase 240v

There are two basic types of miniature circuit breakers (mcb) used in
consumer units. The most common type is "type A" and is normally used where
purely resistive loads are present - For example, on a lighting ring.
A "type B" mcb is used with inductive loads such as large motors or heavy
duty transformers.
In a domestic environment, a "type A" mcb for the ring main is normally rated
at 32A and is sufficiently over rated to handle inductive loads such as
washing machines or vacuum cleaners.

Note: a) Much of this is limited to European electrical installations.
b) This is probably getting outside of Bill's charter. Subject closed.


Regards, Paul.

On Tuesday 07 September 2004 18:40, Roy J. Tellason wrote:
> > That ruddy great big transformer *should* have taps to allow it to run at
> > 240V AC, but you MUST use a type B breaker in the consumer unit.
>
> What's a "type B breaker"?

--
irc channel for EMC users at irc.freenode.org
/join #emc

Pieces of seven! Pieces of seven! (Hrm, parroty error)