Re: [CAD_CAM_EDM_DRO] Need Help w/ EMC and Brushless servos
Posted by
Jon Elson
on 2004-09-26 10:02:44 UTC
siado01 wrote:
ISA slots, you
could try my PPMC board set, which interfaces to the PC's parallel port.
See http://jelinux.pico-systems.com/PPMC.html for more info. It looks
like the
OEM 770 requires a motor with a resolver. You need a different servo amp
if your motors have encoders.
Jon
>Let me start by saying that I am completely clueless on this subject in general but I amYes, that should work. If you have a problem finding a computer with
>trying to educate myself as much as possible.
>
>I am interested in setting up a mill with a few Parker SM servos that I ran across at a great
>deal. Is it possible to use these with the Parker OEM770 drives and an EMC based card
>such as Servo2Go? If not, what other servo amplifiers would anyone recommend with these
>servos that would work?
>
>
ISA slots, you
could try my PPMC board set, which interfaces to the PC's parallel port.
See http://jelinux.pico-systems.com/PPMC.html for more info. It looks
like the
OEM 770 requires a motor with a resolver. You need a different servo amp
if your motors have encoders.
Jon
Discussion Thread
siado01
2004-09-26 09:31:22 UTC
Need Help w/ EMC and Brushless servos
Jon Elson
2004-09-26 10:02:44 UTC
Re: [CAD_CAM_EDM_DRO] Need Help w/ EMC and Brushless servos
siado01
2004-09-26 15:58:21 UTC
Re: Need Help w/ EMC and Brushless servos
Jon Elson
2004-09-26 17:13:54 UTC
Re: [CAD_CAM_EDM_DRO] Re: Need Help w/ EMC and Brushless servos
Paul
2004-09-26 18:19:18 UTC
Re: [CAD_CAM_EDM_DRO] Need Help w/ EMC and Brushless servos