CAD CAM EDM DRO - Yahoo Group Archive

Re: Newb question....

Posted by caudlet
on 2004-10-02 12:05:17 UTC
GREAT idea John. We await your results.

>
> Ok, this is what I thought.
>
> With all the questions about Stepper vs Servo what might be
interesting to
> try is taking the Pico Systems USC with the Gecko Servo Interface
and
> compare the performance of a Stepper motor vs a DC motor (I say DC
motor
> instead of servo to try and avoid confusion). The point being to
have a
> servo environment with as many elements the same like the software,
encoder
> resolution, power supply size, etc. in order to measure
the "efficiency"
> (for lack of a better term) of each motor. Perhaps using motors of
the
> same frame size. I realize that the Gecko 2xx and 3xx series don't
work at
> all the same way to move the motor but it would look the same to
> EMC. Also, I realize that Steppers and Servos don't usually work
in the
> same voltage/amperage range but the bigger power supplies also cost
more so
> it may be a fair handicap. I suspect the result would be that the
DC motor
> works better at medium to higher RPM but at least all the other
elements
> which confuse the issue would be eliminated (like the general
assumption
> that Stepper systems are open loop).
>
>
>
> - John

Discussion Thread

Aiden 2004-09-30 22:23:35 UTC Newb question.... JanRwl@A... 2004-09-30 22:30:19 UTC Re: [CAD_CAM_EDM_DRO] Newb question.... Jon Elson 2004-10-01 07:47:49 UTC Re: [CAD_CAM_EDM_DRO] Newb question.... John Trevick 2004-10-01 12:07:02 UTC Re: [CAD_CAM_EDM_DRO] Newb question.... Jon Elson 2004-10-01 16:05:01 UTC Re: [CAD_CAM_EDM_DRO] Newb question.... John Trevick 2004-10-02 10:20:33 UTC Re: [CAD_CAM_EDM_DRO] Newb question.... caudlet 2004-10-02 12:05:17 UTC Re: Newb question.... John Trevick 2004-10-02 14:07:47 UTC Re: [CAD_CAM_EDM_DRO] Re: Newb question.... Jon Elson 2004-10-02 15:29:22 UTC Re: [CAD_CAM_EDM_DRO] Newb question....