Re: [CAD_CAM_EDM_DRO] Encoder recommendations

US digital E5S-200 encoders about $40 each. The 200 quadrature is perfect for the 320's, any higher resolution and you will need the 340's with step pulse mutiplier.

Ron

kdoney_63021 <kdoney_63021@...> wrote:


I just got a great deal on ebay for 3 servo motors. :-)

Problem was, all of the encoders were broken.:-(

I now have to replace them but was wondering what was recommended. I
am using gecko 320's with Mach2 and would like the highest
resolution. Motors are 4000 rpm no load and will be running about
1000 rpm when on the machine. Back of shaft is 1/4" and 3/4" long. I
would like to use US Digital since I'm familiar with them.

How about linear feedback instead?





Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links









---------------------------------
Do you Yahoo!?
Yahoo! Mail Address AutoComplete - You start. We finish.

[Non-text portions of this message have been removed]