Re: [CAD_CAM_EDM_DRO] Re: hobbie cnc egroup

--- In CAD_CAM_EDM_DRO@egroups.com, Ron Ginger <ginger@s...> wrote:

> fogassa@p... wrote:
>
> > there will be a web page all about it.I just got the ballscrews

and

> > ball nuts,the instructions are all in german,I will need to

contact

> > technoisel to get more information on it.
> ......
> What size are these screws? What is the diameter of the nut? I

measured

> the Grizz and dont think you can use a nut larger than 3/4" OD, and

I

> could not find any under 1".
>
> How about a part number and ref to the ones you got?
>
> thanks
>
> ron

The nuts are 24.5mm hight x 60mm x 25 long I will need to machine a
pocket on the sadle only about 1 or 2 mm deep, and machine the base
of the y axis,minor machining nothing critical.
The screws is 16mm OD aprox. 5/8 and 5tpi aprox. 0.200 lead.
The nuts are suppost to be zero backlash,and has two 6mm threads
for fixing it to the sadle.
Part number is:HL5234m213001 for the nuts, and
HL5134M00452 for the screw.some numbers changes on this one since
the lenght of the screw and other especs changes depending on the
lenght and pitch and finished or not ends.