HP Plotter to Go

Hi Gang,

I have a HP roll style plotter a Design Master, or something like
that (I'm at work and can never remember the name).

I have all the books, and software (HP Drivers mostly); I'll throw in
a cable if you need it.

It's big, but not too heavy (You will want to have a Pickup; 2 people
can get it into the back), if anyone who lives in the San Francisco
Bay Area, or anyone willing to drive to pick it up, I'll sell it for
any offer. You can buy a cutter and software from Germany, which
will allow you to use it to cut vinyl. There are other sources I
have seen on the Web, also.

It's an "E" and will cut or plot as long as you want. It does not
have a roll mount but that's no big deal, as it is just a tube.

The only deal is you have to pick it up and it is more or less first
come first served ( I did this with another piece of equipment, and
had a guy that wanted it…I kept holding it, and he never showed).

I'm getting rid of it because I no longer need it.

Send me e-mail if interested...you might even use some of the
internals to build a CNC thingy. I am posting this in one other
Yahoo Group (CNC). Addresses and stuff of line.

Tim
lotus_14us@...