Re: Proxxon Mill CNC Conversion
Posted by
Ron
on 2004-12-13 16:39:01 UTC
Andrew,
Have you considered a Sieg Mini-Mill? It is about 20 times more
machine yet still small and manageable. I sell plans to convert the
Mini-Mill to CNC if down the road you want to automate. Good luck
with whichever mill you select.
Best regards,
Ron Steele
http://www.stirlingsteele.com/millplans.html
http://www.stirlingsteele.com/latheplans.html
===================================================
--- In CAD_CAM_EDM_DRO@yahoogroups.com, Andrew Dubinsky
<adubinsky@g...> wrote:
Have you considered a Sieg Mini-Mill? It is about 20 times more
machine yet still small and manageable. I sell plans to convert the
Mini-Mill to CNC if down the road you want to automate. Good luck
with whichever mill you select.
Best regards,
Ron Steele
http://www.stirlingsteele.com/millplans.html
http://www.stirlingsteele.com/latheplans.html
===================================================
--- In CAD_CAM_EDM_DRO@yahoogroups.com, Andrew Dubinsky
<adubinsky@g...> wrote:
>
> Does anyone have experience converting this mill to CNC?
>
> http://www.morrisandgreen.com/tl0025_detail.html#accessories
> Proxxon MF70 Micro Mill
>
> I'm leaning between Taig and Sherline, but this one's about half the
> price of other hobby mills.
>
> TIA,
> Andrew
Discussion Thread
Andrew Dubinsky
2004-12-13 10:53:41 UTC
Proxxon Mill CNC Conversion
V FONG
2004-12-13 11:35:21 UTC
Re: [CAD_CAM_EDM_DRO] Proxxon Mill CNC Conversion
timgoldstein
2004-12-13 13:08:53 UTC
Re: Proxxon Mill CNC Conversion
Graham Stabler
2004-12-13 13:22:03 UTC
Re: Proxxon Mill CNC Conversion
Andrew Dubinsky
2004-12-13 14:21:27 UTC
Re: [CAD_CAM_EDM_DRO] Re: Proxxon Mill CNC Conversion
Graham Stabler
2004-12-13 15:56:43 UTC
Re: Proxxon Mill CNC Conversion
Ron
2004-12-13 16:39:01 UTC
Re: Proxxon Mill CNC Conversion
R Rogers
2004-12-13 18:27:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: Proxxon Mill CNC Conversion
Graham Stabler
2004-12-14 02:46:34 UTC
Re: Proxxon Mill CNC Conversion
Steven Ciciora
2004-12-14 06:03:25 UTC
Re: [CAD_CAM_EDM_DRO] Re: Proxxon Mill CNC Conversion
Andrew Dubinsky
2004-12-14 07:53:07 UTC
Re: [CAD_CAM_EDM_DRO] Re: Proxxon Mill CNC Conversion
Richard Garnish
2004-12-14 17:22:30 UTC
Re: Proxxon Mill CNC Conversion
bty776302
2006-09-21 18:21:43 UTC
Re: Proxxon Mill CNC Conversion
Graham Stabler
2006-09-22 01:09:48 UTC
Re: Proxxon Mill CNC Conversion