Re: [CAD_CAM_EDM_DRO] SERVO MOTORS
Posted by
Jon Elson
on 2004-12-18 12:32:13 UTC
Bruce Pigeon wrote:
specified
by a dash number.
dash Kt Ke R, Ohms L, mH Ipeak
-01 24.5 18.1 .26 1.1 83
-02 49 36.2 .79 4.4 42.5
-03 78 57.7 1.94 13.7 30
-04 113 83.5 4.21 28.4 21
Units of Kt are Oz-In/Amp, Ke are Volts/KRPM
Max continuous torque is 410 Oz-In
I don't have any data on the 713.
Jon
>HiI have data for the E-703 motor. It has 4 possible winding patterns,
>
>I am new to this list and found my way here at the urgings of one of your
>members, with whom I am on another list.
>
>I have a question about some server motors that I have. They were
>built by ElectroCraft and the model numbers are 703 & 713. I am looking for
>the specifications for these motors. If anyone has any of this information
>or could lead me in the right direction I would be greatly appreciative.
>
>
specified
by a dash number.
dash Kt Ke R, Ohms L, mH Ipeak
-01 24.5 18.1 .26 1.1 83
-02 49 36.2 .79 4.4 42.5
-03 78 57.7 1.94 13.7 30
-04 113 83.5 4.21 28.4 21
Units of Kt are Oz-In/Amp, Ke are Volts/KRPM
Max continuous torque is 410 Oz-In
I don't have any data on the 713.
Jon
Discussion Thread
Bruce Pigeon
2004-12-18 11:01:22 UTC
SERVO MOTORS
Jon Elson
2004-12-18 12:32:13 UTC
Re: [CAD_CAM_EDM_DRO] SERVO MOTORS
Bruce Pigeon
2004-12-18 13:55:31 UTC
Re: [CAD_CAM_EDM_DRO] SERVO MOTORS