CAD CAM EDM DRO - Yahoo Group Archive

Re: DRIVES FOR BERGER LAHR STEPPERS

Posted by alan923
on 2004-12-19 21:33:41 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "john_glynn57"
<john_glynn57@y...> wrote:
>
> I HAVE A TWO BERGER LAHR STEPPER MOTORS (VRDM 568/50 LNB)WHICH I
> COULD USE FOR A PROJECT HOWEVER I NEED TO GET MY HANDS ON A LOW
COST
> SOLUTION TO DRIVE THE MOTORS. ANY SUGGESTIONS.
>
> JOHN

John, I don't know what the driver requirements are for your motors.
If they are .75A or 1.4A or 2.8A I may have drivers you can use at
very reasonable prices. Need to know the amps/phase and the wire
colors for the 5 or 10 wires coming out of the motor. Contact me
offlist if interested. Thanks, Alan Sutton

Discussion Thread

john_glynn57 2004-12-18 16:55:29 UTC DRIVES FOR BERGER LAHR STEPPERS Robert Campbell 2004-12-18 20:25:43 UTC Re: [CAD_CAM_EDM_DRO] DRIVES FOR BERGER LAHR STEPPERS Bengt 2004-12-18 23:58:17 UTC Re: DRIVES FOR BERGER LAHR STEPPERS caudlet 2004-12-19 07:27:23 UTC Re: DRIVES FOR BERGER LAHR STEPPERS alan923 2004-12-19 21:33:41 UTC Re: DRIVES FOR BERGER LAHR STEPPERS Amaury Jacquot 2004-12-20 01:01:02 UTC Re: [CAD_CAM_EDM_DRO] DRIVES FOR BERGER LAHR STEPPERS erie 2004-12-20 07:16:49 UTC Re: [CAD_CAM_EDM_DRO] Re: DRIVES FOR BERGER LAHR STEPPERS Ron Kline 2004-12-20 09:06:11 UTC Re: [CAD_CAM_EDM_DRO] Re: DRIVES FOR BERGER LAHR STEPPERS