CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] lpt port

on 2000-05-21 12:47:42 UTC
Derek B. wrote:
>
> Hi all,
>
> I can't find the pin outs of the parallel port for the step/dir etc.
> Can someone direct me to the right web page? I am going to use EMC.
>
> Thanks Derek
>


Derek,

Here is the pinout from the NIST website

The pinout for the EMC stepper motor interface is as follows:

Output Parallel Port
------ -------------
X direction D0, pin 2
X clock D1, pin 3
Y direction D2, pin 4
Y clock D3, pin 5
Z direction D4, pin 6
Z clock D5, pin 7

Input Parallel Port
----- -------------
X/Y/Z lim + S3, pin 15
X/Y/Z lim - S4, pin 13
X/Y/Z home S5, pin 12

Bill

Discussion Thread

Steve Carlisle 2000-05-21 10:53:48 UTC Re: [CAD_CAM_EDM_DRO] lpt port Derek B. 2000-05-21 11:21:31 UTC Re: [CAD_CAM_EDM_DRO] lpt port William Scalione 2000-05-21 12:47:42 UTC Re: [CAD_CAM_EDM_DRO] lpt port Tim Goldstein 2000-05-21 13:03:16 UTC RE: [CAD_CAM_EDM_DRO] lpt port Steve Carlisle 2000-05-21 13:27:34 UTC Re: [CAD_CAM_EDM_DRO] lpt port