RE: [CAD_CAM_EDM_DRO] Driver board recommendation
Posted by
John Guenther
on 2005-01-26 02:50:06 UTC
Vic,
Check out www.pmdx.com for the pmdx-150 driver boards. I run a full set of
these on my lathe and am very pleased with the quality of the product and
the product support. Steve Stallings ad PMDX is a good guy and has a large
collection of machine tools himself.
John Guenther
'Ye Olde Pen Maker'
Sterling, Virginia
-----Original Message-----
From: victorlorenzo@... [mailto:victorlorenzo@...]
Sent: Tuesday, January 25, 2005 21:26
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Driver board recommendation
My project is a a mill/engraver with x, z, and a axes. The a axis is
a rotary table in vertical position, and the parts will be mounted on
a mandrel. It will be a very light duty unit: X - 6" travel, Z - 3"
travel. Tool dia. < .125". Materials will range from plastics to
aluminum and other relatively soft metals. Speed is not the most
important consideration. All motors will have a 23 frame, 80 oz or
so, probably unipolar.
I have looked at several controllers in the low price range, and I am
undecided. I would appreciate hearing from anybody who has
experience with Stepperworld, Stepper3, and other similar
controllers. I would like to keep the cost of the board itself under
$300 if at all possible.
Thank you for your help,
Vic
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
Check out www.pmdx.com for the pmdx-150 driver boards. I run a full set of
these on my lathe and am very pleased with the quality of the product and
the product support. Steve Stallings ad PMDX is a good guy and has a large
collection of machine tools himself.
John Guenther
'Ye Olde Pen Maker'
Sterling, Virginia
-----Original Message-----
From: victorlorenzo@... [mailto:victorlorenzo@...]
Sent: Tuesday, January 25, 2005 21:26
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Driver board recommendation
My project is a a mill/engraver with x, z, and a axes. The a axis is
a rotary table in vertical position, and the parts will be mounted on
a mandrel. It will be a very light duty unit: X - 6" travel, Z - 3"
travel. Tool dia. < .125". Materials will range from plastics to
aluminum and other relatively soft metals. Speed is not the most
important consideration. All motors will have a 23 frame, 80 oz or
so, probably unipolar.
I have looked at several controllers in the low price range, and I am
undecided. I would appreciate hearing from anybody who has
experience with Stepperworld, Stepper3, and other similar
controllers. I would like to keep the cost of the board itself under
$300 if at all possible.
Thank you for your help,
Vic
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
Discussion Thread
victorlorenzo@y...
2005-01-25 22:03:53 UTC
Driver board recommendation
Dave Rigotti
2005-01-26 00:57:10 UTC
Re: [CAD_CAM_EDM_DRO] Driver board recommendation
John Guenther
2005-01-26 02:50:06 UTC
RE: [CAD_CAM_EDM_DRO] Driver board recommendation